| Front Suspension & Steering Parts 1967 Dodge Coronet |
| |
| BUSHINGS: |
| Energy Suspension |
| Front UCA* & LCA* Bushings (LCA* is rubber only) | 5.3112 | Qty:1 |
Didn't use the poly LCA rubber from 5.3112. If you don't lubricate this well, you get squeaking!
There are special pivot-shafts with lubrication holes, to lubricate the polyurethane bushing. That says enough, i think...
|
| Strut Rod Bushings | 5.7109 | Qty:1 |
| UCA* Bump Stops | 9.9103 | Qty:1 |
| LCA* Bump Stops | 9.9119 | Qty:1 |
| Torsion Bar Dust Boots | 5.13101 | Qty:1 |
| |
| MOOG |
| Front LCA* Bushing | K791 | Qty:2 |
| The K791 is a bushing with metal inner and outer shells.
I prefer this one over the poly rubber bush. With the poly bush you have to reuse the inner and outer metal shells.
Oh, and no squeaking with this one...
|
| |
| STEERING PARTS: |
| MOOG |
| Caster/Camber Cam Bolt | K8243A | Qty:2 |
| Ball joint - Upper | K772 | Qty:2 |
| Ball joint - Lower LH | K783 | Qty:1 |
| Ball joint - Lower RH | K781 | Qty:1 |
| Idler arm | K779 | Qty:1 |
| Tie Rod End - Inner | ES319L | Qty:2 |
| Tie Rod End - Outer | ES319R | Qty:2 |
| Tie Rod End Adjust Sleeve | ES319S | Qty:2 |
| |
| Rare Parts |
| Pitman arm | 20101 | Qty:1 |
| Strangely enough Moog doesn't make pitmans for 67 b-bodies... |
| |
| * UCA: Upper Control Arm, LCA: Lower Control Arm |
| Qty: Quantity per car |
| |
| OTHER STUFF: |
| Ball Joint, Tie Rod & Pitman Removal Tools |
| Front wheel bearings & seals |
| |
| Hotchkis Sport Suspension |
| Dust Caps, Zerk Grease Fitting Covers | 1790 | |